Vibrating Feeder

Vibrating Feeder is a kind of linear-direction feeding equipment, in the mineral ore &rocks processing plants, it can send materials to crusher evenly and continuously. At the same time, it can screen materials roughly, increasing the practical handling capacity of the whole production line.

We're here to help:
Easy ways to get the answers you need. Service Online

Installation Attentions Of Vibrating Feeder

  • Vibrating feeder generally adopts hanging type installation. The boom should be installed on the structure which has enough rigidity. For the large feeder, in order to conveniently repair and replace, it also should set up a mobile carriage.
  • Vibrating feeder should be overall installation. In general, it does not allow the disassembly, and not allowed any rigid attachment on the machine. When installation, it should leave some space for the activities surrounding equipment, to avoid the collision with other equipment.
  • The trough body of vibrating feeder can be installed horizontally, and can be installed in a slope. The feeding capacity and declination angle is proportional. But if the below angle is too large, it is easy to cause the material flows, and difficult to guarantee the precision of feeding. Therefore, according to the nature of the materials, we can be sure of is tilted upward, downward sloping or horizontal.
  • After installation, the feeder should be in the level state, to avoid material deviates to one side, and ensure that all fastening bolts securely fastened.

Maintenance Attentions Of Vibrating Feeder

  • Always check the feeding trough amplitude and coil current. Note that whether the sound of machine is normal. If it is found that the sound suddenly become larger, or has impact sound, to carefully analyze the reasons, and immediately stop processing.
  • The iron core and the armature must balance. Always check whether the bolts are loose, and the gap is normal. If the bolt is loosening and plate spring fracture, and the air gap between the iron core and the armature changes or impacts, it should immediately process.
  • Always check whether the hoisting device loose. If find loose, it will affect the feed quality. So it should be immediately fastened.
  • The sealing cover must be covered well, to prevent dust entering and blocking. It should always clean up the ash.
Model Trough Size(mm) Max Feeding (mm) Capacity (t/h) REV (r/min) Power (kw) Motor Model Machine Size(mm)
ZSW 180x80 1800×800 300 30-80 970 6-1.5×2   2200×1100×800
ZSW 200x120 2000×1200 300 80-500 970 6-2.2×2   2000×1200×855
ZSW 300X85 3000×900 300 40-100 970 6-2.2×2   3050×1430×1550
ZSW 380X96 3800×960 500 90-200 710 6-15 Y180L-6/15 3880×2240×1880
ZSW 420X110 4200×1100 580 150-350 710 6-15 Y180L-6/15 4300×2450×2010
ZSW 490X110 4900×1100 580 180-380 780 6-15 Y180L-6/15 4980×2450×2010
ZSW 490X130 4900×1300 750 250-450 780 6-22 Y200L2-6/22 4980×2710×2050
ZSW 600X150 6000×1500 800 600-1000 780 6-30 Y255M-6/30 6160×2919×2293

Send A Message

You can get the price list and a SBM representative will contact you within one business day.